Which valve is suitable for my bathroom radiator?
Multiblock, valve set, or valve body? The connection type, pipe orientation, and a few dimensions determine which valve is right for your bathroom radiator—explained step by step.

In short: You can determine which valve is right for your bathroom radiator in three steps. First, the connection type determines the component: a multiblock for a center connection, or a thermostatic valve with a return fitting for a side connection. Next, the pipe orientation determines whether you need an angled or straight-through design. Finally, check the thread, pipe diameter, and color.
The end of April brings the heating break, and many people use the time to improve something in the bathroom. The valve is often on the list: because the new bathroom radiator needs one, because the old one is stuck, or because it no longer matches the look.
Many items in the accessories aisle look similar. However, you can quickly narrow down the selection to the component that fits your radiator and pipes by asking three questions.
First, the connection type: it determines the component
The first question is: Where are the connections on your bathroom radiator? This determines what type of valve you need in the first place.
| Connection type | Suitable component | What it does |
|---|---|---|
| Center connection, 50 mm | Multiblock | connects both pipes in a single unit |
| Side connection | Thermostatic valve and return fitting | one component for each side |
| Radiator with built-in valve | Hahnblock | connects the flow and return pipes at the bottom |
With a center connection, both pipes connect centrally at the bottom of the radiator. The multiblock set in angled and straight-through designs accommodates them in a compact component. With a side connection, a thermostatic valve is fitted to the flow pipe and a fitting to the return pipe, both of which are included in the thermostatic valve set angled ½″ in chrome.
Radiators with built-in valves, which are more common in living spaces, already have the valve installed. There, a two-pipe hahnblock provides the connection to the pipes. This design is less common in bathrooms, for example when a flat radiator provides the basic heat.
Next, the pipe orientation: angled or straight-through
The second question is quickly answered if you look under the radiator: Do the pipes come out of the wall or the floor?
- Pipes from the wall: You need an angled valve. It routes the connection around the corner from the radiator to the wall.
- Pipes from the floor: You need the straight-through design. Here, the connection runs straight down.
Confusing the two is one of the most common mistakes when ordering. The component looks similar, but it fits in the wrong direction and cannot be properly connected. The multiblock set is available in both designs, while the thermostatic valve set is available in an angled design.
Finally, thread, pipe size, and color
The third step involves the dimensions at which the valve is connected to the radiator, pipe, and thermostat head.
- Thread on the radiator: Bathroom radiators usually have connections with a G ½″ thread. The data sheet tells you exactly.
- Pipe diameter: Measure the outside diameter of your heating pipe. 15, 16, or 18 mm are common, and suitable compression fittings are available for exactly this purpose.
- Thermostat head: The standard connection is M30 × 1.5. Check whether your head fits or order a suitable one with it.
- Color: Chrome looks like part of the fittings, while white, anthracite, or black match the color of the radiator.
Tip: Photograph the radiator connection and pipes with a tape measure next to them before you order. The photo will also make it easy to clearly determine the shape, diameter, and connection type later.
What else matters for the bathroom radiator valve
A good valve does not just regulate; it can also be set. Many thermostatic valves are pre-settable. With the pre-setting, the heating professional limits how much water can flow through the radiator so that all radiators in the house heat up evenly. The purpose of the numbers on the valve is explained in the article Pre-settable Thermostatic Valves.
Also check what is already included with your radiator. Many bathroom radiators are supplied with a mounting set, blanking and bleed plugs, but without a valve. What is usually included and what you need to order separately is shown in the article Scope of Delivery for Bathroom Radiators.
Important: You may remove and attach the thermostat head yourself. The valve itself is in contact with the heating water, and a heating professional is responsible for installing or removing it.
Typical situations and the right choice
Finally, four cases that occur frequently in bathrooms, with the component that fits each one:
- New build, bathroom radiator with center connection, pipes from the screed: Multiblock in a straight-through design, color matching the radiator.
- Renovation, connections at the bottom left and right, pipes from the wall: Thermostatic valve and return fitting in an angled design.
- Replacement radiator with connections one above the other on one side: Thermostatic valve at the top on the flow pipe, return fitting at the bottom, each in the design that fits the pipe orientation.
- Flat radiator with built-in valve as basic heat in the bathroom: Hahnblock in an angled or straight-through design.
If your situation does not fit any of these cases, for example because the pipes are positioned unusually, speak to a heating professional before ordering. They can see on site which component fits properly and avoid improvised solutions with adapters.
Frequently Asked Questions
Is a valve included with a new bathroom radiator?
Usually not. The scope of delivery generally includes the radiator, a mounting set with plugs, and the instructions. You choose the suitable valve yourself based on the connection type and pipe orientation.
Can I continue to use the old valve on the new radiator?
Only if it fits the connection type, thread, and pipe orientation and still works perfectly. Old valves are often stiff or can no longer be pre-set. That is why it is usually worth replacing the valve at the same time when replacing the radiator. The heating professional will clarify this on site.
How can I tell if my radiator has a built-in valve?
On a radiator with a built-in valve, the valve is fitted at the top on one side of the radiator, and the thermostat head is screwed directly onto it. At the bottom, the two connections are located close together. Ladder radiators usually do not have a built-in valve.
Does the valve have to be the same color as the radiator?
No, that is a matter of taste. Tone-on-tone looks understated, while chrome matches well with chrome fittings. The only important thing is to make a conscious choice, as the valve is visible under the radiator.
Find the right valve
Multiblock for center connections, valve set for side connections, hahnblock for radiators with built-in valves: everything you need to connect your radiator in one place.


