Energy costs

How much does an electric bathroom radiator cost in everyday use?

Instead of flat rates: a calculation method that allows you to determine the electricity consumption of your electric bathroom radiator yourself and assess it using your own tariff.

by Helia Bad Redaktion6 min read

Elektro-Badheizkörper SKAGEN in Weiß mit Heizstab-Regler unten links an einer hellen Putzwand

In short: You calculate the consumption of an electric bathroom radiator yourself: the heating element's power in kilowatts multiplied by the operating hours gives kilowatt-hours, which you then multiply by the unit price of your electricity tariff. Because the temperature control switches the heating element off again and again, the actual consumption is usually below this maximum value. The biggest factors are the operating time and the set temperature.

At the beginning of August, only one radiator is still running in many bathrooms: the electric one. It keeps towels dry while the central heating is on summer break. At the latest when you look at your next electricity bill, the question arises what that actually costs.

There is no blanket answer, and we deliberately do not mention any amounts. Electricity prices vary from tariff to tariff and change over time. With the following calculation method, you can arrive at a reliable result using your own figures.

Electric bathroom radiator: consumption in three steps

For the calculation, you need three pieces of information: the power of the heating element, the time it runs, and your unit price per kilowatt-hour.

  1. Read the power: It is stated in the data sheet. For the electric VINDA in white, for example, it is 600 W in size 44 × 121 cm and 1200 W in size 50 × 160 cm.
  2. Estimate the operating time: How many hours a day is the radiator switched on? Count only the time when it is actually on.
  3. Calculate: Power in watts multiplied by hours, divided by 1000, gives kilowatt-hours. You multiply this number by the unit price from your electricity contract.

An example without prices: A 600 W heating element that is switched on for two hours a day consumes at most 1.2 kWh a day. Calculated over 30 days, that is at most 36 kWh. Multiplied by your unit price, you know the upper limit for one month.

Tip: You can find the unit price on your last electricity bill or in the contract. The basic price is not part of this calculation because it is charged regardless of consumption.

Also take the seasons into account. In summer, an electric bathroom radiator usually only runs briefly for the towels. During the transitional season and in winter, when it is also supposed to warm the room, more hours and more reheating add up. An estimate per season is therefore more accurate than a single average value.

If the terms watt, kilowatt, and kilowatt-hour are not yet completely familiar to you, the article Watt, kilowatt, kilowatt-hour simply explained will help.

Why the rated power is only the upper limit

The calculation above assumes that the heating element heats at full power all the time. In practice, it only does this during the heating-up phase. Electric bathroom radiators have a temperature control: When the set temperature is reached, the heating element switches off and only heats again when the radiator cools down.

How often it reheats depends on how much heat the radiator gives off to the room. In a warm summer bathroom, this is little, in a cool bathroom in winter significantly more. The actual consumption can therefore be noticeably below the maximum value.

If you want to know exactly, measure it. Read the electricity meter at fixed times on one day, once with and once without the radiator, with a similarly similar everyday routine. If the radiator is connected to a socket, a power strip with a consumption display also shows the value.

What influences consumption in everyday life

With the same power, two households can need very different amounts of electricity for the same radiator. These points make the difference:

Influence Effect What you can do
Operating time biggest factor switch on and off specifically
set temperature higher means more frequent reheating set lower for towels
room temperature cold bathroom draws more heat close the door, ventilate briefly
wet towels evaporation requires energy shake out towels beforehand
size of the radiator more filling, longer heating up choose a size suitable for the needs

A heating element with higher power does not automatically consume more. It reaches the set temperature faster and then switches off earlier. What matters is the heat that the radiator gives off overall, and that depends above all on how long and how warm it runs.

Electricity or central heating: weigh up correctly

An electric radiator converts the electricity it draws completely into heat. One kilowatt-hour of electricity thus becomes one kilowatt-hour of heat. Whether that is affordable compared to central heating depends on your tariffs: compare the unit price for electricity with that for your heating energy.

For short, targeted uses such as drying towels in summer, this comparison plays a smaller role, because the central heating would not run for this anyway. It is different when an electric radiator heats a large bathroom alone in winter. Then many hours add up, and the recalculation is particularly worth it.

In rented apartments, another point comes into play. Water-carrying radiators are often billed there via heating cost distributors, electric radiators run through your own electricity meter. What these devices measure is explained by the article Heating cost distributors on the radiator. There is also a single heating element with temperature control for mixed operation on an existing radiator.

Frequently asked questions

How much electricity does a 1200 W heating element need in one hour?

At most 1.2 kWh, if it heats at full power for the whole hour. Due to the temperature control, it switches off in between, the actual value is then below that. How far below that only a personal measurement shows.

Is an electric bathroom radiator a power guzzler?

That depends almost entirely on the usage. Who switches it on specifically after showering, gets by with a few operating hours. If it runs around the clock on a high setting, the consumption quickly adds up.

Does a lower temperature on the controller really save electricity?

Yes. The warmer the radiator is, the more heat it gives off to the room and the more often the heating element has to reheat. For dry towels, a medium setting is usually sufficient.

How do I measure the consumption if the radiator is permanently connected?

Then the electricity meter helps. Read it at fixed times, on days with and days without the radiator, with as similar an everyday routine as possible. The difference shows you approximately what the radiator needs.

Compare electric bathroom radiators

In the data sheet of each model is the power of the heating element per size. With that, you can estimate the consumption for your bathroom even before buying.

View electric models View electric VINDA

More on this topic:Energy costs

Radiator Finder

Find the right radiator in three questions

Question 1 of 3

How should the radiator be heated?
Replace an old radiatoropen the replacement finder (centre distance)

View calculation or consider flow temperature? Calculate the heating load for your room

More from the shop

Browse all models, sizes and colours.

View Electric Bathroom Radiators & Towel Radiators