Technology

Radiation or convection: How a radiator heats the room

A radiator warms you in two ways: directly through its surface and indirectly through the air in the room. We explain how design and temperature shift this balance.

by Helia Bad Redaktion6 min read

Paneelheizkörper FJELLA horizontal in Anthrazit mit glatter Front an einer hellen Wohnzimmerwand neben einem Beistelltisch

In short: Every radiator emits heat through radiation and convection. Radiation travels directly from the warm surface to walls, furniture, and skin, while convection heats the air, which rises and circulates through the room. Smooth, flat designs emit a higher proportion of radiation, while radiators with many fins and layers primarily heat the air.

On the last day of the year, it is often grey and cold outside. If you sit close to the radiator with a cup of tea, you feel the warmth on your face even before the whole room is warm. Other rooms, by contrast, warm up evenly without you even noticing the radiator.

Both are correct, and both happen at the same time. How large each proportion is depends on the radiator's design, temperature, and position.

Radiation and convection: two ways of heating

Radiation is heat that emanates from a warm surface as invisible infrared light. It does not heat the air in between, but rather whatever it hits: your skin, the sofa, the opposite wall. That is why the warmth of a tiled stove or a sunny windowsill feels so direct.

Convection is heat that carries the air with it. The air at the radiator warms up, becomes lighter, and rises. Cooler air flows in from the floor below. This creates a slow air current that moves through the entire room. If the radiator is under the window, this current also catches the cool air that falls down the pane.

A small third way is heat conduction through direct contact, for example when a towel lies on the rails. It plays almost no role in space heating.

How the design shifts the balance

The more internal surface area a radiator has for air to flow over, the greater the proportion of convection. Flat radiators achieve this with fins, the so-called convector fins, between their panels. The visible front radiates, while the fins behind heat the air.

Design Focus What you feel
Flat radiators with multiple layers Convection Evenly warm room air
Panel radiators with a smooth front Radiation through the front, plus convection Direct warmth in front of the surface
Bathroom radiators with rails Mixed Warm towels, warm air in the bathroom
Underfloor heating Radiation Warm feet, little air movement

An example of convection is the KONRAD Type 22: Its two layers with fins in between deliver a lot of heat on a small wall area and heat the room primarily through the air. The FJELLA Horizontal in white, by contrast, features a smooth panel front that radiates warmth into the room as a calm surface. A towel rail bathroom radiator like the NORDVIK in white lies somewhere in between: The pipes radiate, while the air between them rises.

Why temperature also plays a role

Both methods depend on how much warmer the radiator is than the room. The smaller this difference, the less heat it emits. The output does not drop evenly, but disproportionately. According to the data sheet, a KONRAD Type 22 measuring 600 × 1000 mm delivers 1754 W at 75/65/20 °C, but only 884 W at 55/45/20 °C. The figures indicate flow temperature, return temperature, and room temperature.

The radiator's position in the room also plays a part. Under the window, the rising warm air meets the cool air falling down the pane, preventing it from sweeping across the floor as a draft. On an interior wall, this effect is missing, but the radiator radiates into the room unimpeded.

This is why surface area becomes more important at the low flow temperatures often used by modern heating systems. A larger or deeper radiator compensates for what is lacking in temperature. With very large areas at a low temperature, such as underfloor heating, radiation predominates because the warm air has little buoyancy.

What you feel in everyday life

In everyday life, the two methods can be identified by small observations. Those who know them can position furniture and curtains better and understand some of the quirks of their room.

  • The wall above the radiator becomes darker: The rising air carries dust that settles on the wall. A sign of convection.
  • A sofa directly in front of it gets warm, while the room remains cool: The sofa absorbs the radiation and slows down the air current. The German Federal Environment Agency therefore advises against covering or blocking radiators.
  • Long curtains in front of the radiator: The warm air rises behind the curtain toward the window instead of flowing into the room.
  • The radiator is cold at the top: Warm water is missing there, usually due to air in the radiator. Where it comes from is explained in the article Air in the heating system: where it comes from.

Radiation becomes visible with a thermal imaging camera. It shows how warm the surfaces of radiators, walls, and furniture really are. How to interpret the images is explained in the article Thermal imaging camera: making radiators and cold spots visible.

Frequently asked questions

Is radiant heat more pleasant than warm air?

Many people find radiation more comfortable because it warms walls and bodies directly and moves less air. However, there is no blanket answer. The important thing is that the radiator is large enough and that walls, floors, and air become similarly warm.

Why is it warmer under the ceiling than on the floor?

Warm air rises and collects there. The higher the proportion of convection and the higher the flow temperature, the stronger this stratification becomes. It is particularly noticeable in rooms with high ceilings.

Does the color of the paint affect radiant heat?

Hardly at all. In the infrared range, painted surfaces behave almost identically, regardless of whether they look white, grey, or black. It is different with bare metal such as chrome: It radiates significantly less, which is why chrome-plated radiators deliver less heat than painted radiators of the same design.

Is a radiator cover worth it?

From a heating perspective, probably not. A cover blocks the radiation and slows down the air current, so the room warms up more slowly. If you do not want to see the radiator, it is better to choose a calm design with a smooth front.

Flat front, calm warmth

Are you looking for a radiator that looks like a flat surface rather than a package of fins? Take a look at panel radiators and flat radiators in various lengths.

View panel radiators View FJELLA Horizontal

More on this topic:Technology

Radiator Finder

Find the right radiator in three questions

Question 1 of 3

How should the radiator be heated?
Replace an old radiatoropen the replacement finder (centre distance)

View calculation or consider flow temperature? Calculate the heating load for your room

More from the shop

Browse all models, sizes and colours.

View Panel radiators & flat-panel radiators