Radiator Glossary: The Most Important Terms from Balancing to Valve Body
Center-to-center distance, Type 22, 75/65/20 or valve body: When buying a radiator, you will encounter many technical terms. The glossary explains the most important ones briefly and clearly, organized by topic.

In short: The most important radiator terms revolve around four questions: What design is it, how is it connected, how much heat does it deliver under which conditions, and with what fittings is it controlled. Anyone who can identify center-to-center distance, standard heat output, type designation, and valve body can read any data sheet without guesswork.
End of April is the time for many when the idea of a new radiator becomes a concrete plan. At the latest with the first data sheet, you will stumble over terms that never occur in everyday life. This glossary collects them in one place.
The terms are grouped by topic, alphabetically within each group. This way you can quickly find what you are looking for and immediately see which terms belong together.
Radiator terms for design and type
- Replacement radiator: A radiator whose connections fit the distance of an old model. It replaces the previous one without having to lay pipes in the wall.
- Bathroom radiator, towel radiator: Radiators with horizontal bars between two vertical collector pipes, designed for the bathroom and for drying towels.
- Electric bathroom radiator: A closed, heat-transfer fluid-filled radiator with a built-in heating element that only needs electricity and is not connected to the heating system.
- Flat radiator: Radiator made of one or more flat, water-carrying steel plates, often with fins in between. Typical in living spaces under the window.
- Compact radiator: Flat radiator with side connections, usually without a built-in valve.
- Convector: Corrugated sheet between or behind the plates that increases the surface area where the air is heated.
- Panel radiator: Radiator with a smooth, closed front without visible grooves. It looks like a calm surface on the wall.
- Type 11, 21, 22, 33: The first digit states the number of water-carrying plates, the second the number of convector layers. A Type 22 therefore has two plates and two convector layers, a Type 33 has three of each.
- Valve radiator: Flat radiator with a built-in valve and connection at the bottom. A separate thermostat valve on the side is not required.
Dimensions and connections
- G ½″ connection thread: The common female thread on bathroom and flat radiators, into which fittings, plugs, or a heating element are screwed.
- Depth: The depth of the radiator itself, without brackets and fittings. More plates mean more depth.
- Center connection: Flow and return are located close together at the bottom center. For the HALDEN in white, the distance between these two connections is 50 mm according to the data sheet.
- Center-to-center distance: The distance between two connections, measured from center to center. It is the most important dimension when replacing a radiator.
- Side connection: Flow and return enter the radiator from the side. Depending on the model, they are located on both collector pipes or close together on one side.
- Flow and return: The flow brings the warm water to the radiator, the return carries the cooled water back. They must not be swapped if the radiator specifies a fixed direction.
- Wall distance: How far the radiator with its brackets stands from the wall. Important for pipes, skirting boards, sockets, and window sills.
- Opposite connection: Flow at the top on one side, return at the bottom on the other side. Common with very long radiators.
Output, temperature, and pressure
- 75/65/20 °C: The standard conditions for output ratings: 75 °C flow, 65 °C return, 20 °C room temperature. Ratings at 55/45/20 °C for low temperature are also common.
- Operating pressure: The highest permissible pressure in continuous operation, stated in bar. For the HALDEN, the data sheet states 4 bar.
- DIN EN 442: The standard according to which the heat output of radiators is tested and stated.
- Exponent n: A value that describes how much the output of a radiator drops when the water temperature is lower than at the standard conditions. It is used for conversion.
- Heating load: The heat output that a room needs on a very cold day to stay warm. It is calculated according to DIN EN 12831.
- Standard heat output: The output in watts that a radiator delivers under standard conditions. It is in the data sheet and is the basis for any comparison.
- Test pressure: The pressure at which the radiator or system is tested for tightness. It is above the operating pressure.
- Water content: The amount of heating water in liters that the radiator holds. It influences how quickly it gets warm.
For district heating, pressure and temperature are often subject to the supplier's own specifications. What needs to be considered is described in the article District heating and bathroom radiators. How the water in the system should be prepared is explained in the article Preparing heating water.
Fittings, control, and accessories
- Hydraulic balancing: The adjustment of the water quantity for each radiator so that all rooms are heated evenly. It is carried out by the heating specialist company via the pre-setting of the valves.
- Corner shape and through shape: Designs of connection fittings. The corner shape fits when the pipes come out of the wall, the through shape when they come out of the floor.
- Bleed valve: Small valve at the highest point of the radiator, through which collected air is released.
- Stop valve: Shut-off connection fitting for valve radiators, which sits under the radiator and takes in flow and return. It is shut off.
- Heating element: Electric heating element that is screwed into a radiator. In the electric bathroom radiator, it is the only heat source.
- Mixed operation: A water-carrying bathroom radiator gets an additional heating element, usually via a T-piece. In winter, the central heating heats, in summer, electricity.
- Multiblock: Connection fitting for radiators with center connection. The Multiblock set for bathroom radiators is available in corner and through shapes, it takes in both pipes and carries the thermostat head.
- Thermostat fluid: The heat transfer fluid with which an electric bathroom radiator is filled.
- Thermostat head M30 × 1.5: The controller that is placed on the valve. M30 × 1.5 is the common connection thread.
- Valve body: The actual valve body in the radiator or in the fitting. The thermostat head is placed on it, and the pre-setting for balancing is carried out on it.
You can find all models with their data sheets at all radiators.
Frequently asked questions
Which information from the glossary do I need first for a radiator replacement?
First the center-to-center distance and the connection type, because they decide whether the new radiator fits the existing pipes. Then the output at your flow temperature and the dimensions. The rest is usually fine-tuning.
Is Type 22 a size for a flat radiator?
No, the type designation describes the construction, not the size. A Type 22 is available in many heights and widths. The type tells you how many plates and fins it has and thus how much output it delivers on a certain area.
What does the 55/45/20 rating in the data sheet mean?
It states flow, return, and room temperature in degrees Celsius, under which the stated output applies. These values are lower than the standard conditions 75/65/20 and fit modern heaters and heat pumps better. The output is correspondingly smaller.
Terms clear, now find the right model
The radiator finder under this article helps you narrow down the right model for your room from design, connection, and size.


