Efficiency

Heating in the home office: Only heat one room?

When you work from home, you heat your home differently during the day. How to keep one room warm without letting the rest get chilly.

by Helia Bad Redaktion6 min read

Multiblock-Set in Anthrazit mit Thermostatkopf auf einer Travertin-Ablage

In short: If you want to heat your home office, bring the study up to a comfortable temperature during the day and moderately lower the temperature in the other rooms instead of letting them cool down. Closed doors, correctly set thermostat heads, and a schedule that suits the working day do the rest. Very cold adjacent rooms draw heat from the office and bring moisture to cold walls.

In mid-December, the days are at their shortest. If you work from home, you are often already sitting in the dark at your desk and notice how the cold from the window creeps down to your feet. At the same time, the rest of the apartment stands empty all day. It is therefore tempting to heat only the study.

This is generally correct, but has its limits. Heat does not stay obediently in one room, and completely cooled-down rooms create their own problems. With a few settings, you can find a good middle ground.

Why a warm room does not stay warm on its own

Heat always flows from the warm to the cold place, and the greater the temperature difference, the stronger it flows. Interior walls and doors are usually barely insulated. If the study is warm and the bedroom next door is cold, your radiator heats the adjacent room to some extent through the shared wall.

Then there is the moisture. Warm room air contains more water vapor. If it flows through an open door into a cold room, it cools down there and releases water to the coldest surfaces, often at exterior corners or behind wardrobes. Why rooms should therefore not be allowed to cool down completely is explained in the article Do not turn the radiators off completely.

For living and working rooms, around 20 °C is considered comfortable, as also recommended by the German Environment Agency. Less frequently used rooms may be cooler, but should not cool down permanently.

Keeping a room warm: the plan for the working day

Instead of heating everything or nothing, a simple staggered approach helps:

Room During the day in the home office What to pay attention to
Study comfortably warm keep the door closed
Living room slightly lowered turn up in time before the end of the working day
Bedroom cooler do not turn off completely
Bathroom warm during shower times ventilate afterwards
Hallway low close the doors to the warm rooms

The closed door is the most important tool here. It keeps the heat in the study and the moist air out of the cooler rooms. Cross-ventilation during the lunch break brings in fresh air without letting the walls cool down.

Correctly setting thermostat heads

A thermostat head measures the room temperature and opens or closes the valve until the set value is reached. The numbers on the scale stand for temperatures, not heating power. Which number corresponds to which temperature is stated in the instructions of the head.

  • No gas pedal: Turning the head to the highest setting does not make the room warmer faster. The radiator opens fully anyway as long as it is colder than set. It just stops later, and the room becomes overheated.
  • Free air: The head must be able to measure the room air. Behind curtains or furniture, it measures its own heat and closes too early.
  • Frost protection instead of zero: Completely closed heads in adjacent rooms let the rooms cool down. The frost protection setting is the safer choice for rooms that you really do not use.

If an old head is stiff or no longer regulates reliably, it is worth replacing. The M30 × 1.5 thermostat head regulates continuously and fits most radiator valves with its standard thread. You can change the head without having to intervene in the system itself.

Adapting the time program and heating to the working day

Many heaters are still set to a classic working day: warm in the morning, lowered during the day, warm again in the evening. If you work from home, you are sitting at your desk exactly during the lowering period. The time program on the controller can usually be changed yourself, and the instructions show how to do it.

A special rule applies to heat pumps. They operate most efficiently with uniform, low temperatures. Strong lowering and rapid reheating do not suit this well. Whether lowering is worth it for your system, you should discuss with the heating specialist company.

Programmable or networked thermostat heads allow for individual schedules per room. They are especially worth it if your home office days repeat regularly.

If the study still remains cool

If it remains cool at the desk despite the thermostat being correct, it is often due to the location or the heating surface:

  1. Move the desk: Directly at the window, you feel the cold air that sinks down the pane. Even a little distance helps.
  2. Keep the radiator free: Rolling containers, printers, or stacks of paper in front of it block the heat.
  3. Check the heating surface: A radiator that was sufficient for a rarely used guest room is often barely enough for a full working day.

A flat radiator like the KONRAD Type 22 provides 1754 W at 75/65/20 °C and 884 W at 55/45/20 °C in the size 600 × 1000 mm according to the data sheet. You can find other formats in the living room radiators. If you also use a fireplace oven, you should know how it interacts with the thermostats in the house. This is described in the article Fireplace oven and radiator.

Frequently asked questions

Does it save energy to heat only the study?

Yes, if the other rooms are moderately lowered instead of completely cooled down. Very cold adjacent rooms draw heat through the interior walls and can become damp. The savings are then smaller than you think.

Should the door to the study remain closed?

Yes. This keeps the heat in the room, and warm, moist air does not flow into cooler rooms. It is best to ventilate briefly and vigorously through the window.

How quickly does a lowered room become warm again?

This depends on the radiator, the flow temperature, and how far the room has cooled down. The deeper the lowering, the longer it takes. Therefore, start the reheating in time via the time program.

Does water need to be drained for a new thermostat head?

No. The head is simply screwed or pushed onto the valve, and the system remains closed. Check beforehand whether the thread fits. M30 × 1.5 is widely used.

Regulate each room individually

A continuously regulating thermostat head keeps the study exactly at the temperature you have set. For more heating surface, there are suitable flat radiators.

View thermostat head View living room radiators

More on this topic:Efficiency

Radiator Finder

Find the right radiator in three questions

Question 1 of 3

How should the radiator be heated?
Replace an old radiatoropen the replacement finder (centre distance)

View calculation or consider flow temperature? Calculate the heating load for your room

More from the shop

Browse all models, sizes and colours.

View Residential radiator