Spring: When You Can Turn Off the Heating
Temperatures fluctuate wildly in spring. When it pays to take a break from heating, how to tell your home’s heating limit, and what to do before switching off.

In short: It pays to switch off the heating in spring if the daily mean outdoor temperature remains above your home's heating threshold for several days in a row and the rooms stay comfortable without reheating. First, turn up the thermostats, make a note of anything unusual during the winter, and set the heating system to summer mode instead of switching it off completely.
In May, noon often already feels like summer, but the nights remain cool. Then the heating briefly kicks in in the morning, while the windows are open at noon. It is precisely during this transitional period that the question arises as to when the heating can be switched off.
There is no fixed date for this. What matters are the outdoor temperature throughout the day, the construction of your home, and the rooms in which you prefer it warmer. Above all, the bathroom.
The heating threshold: When your home can manage without heat
Experts speak of the heating threshold. This refers to the outdoor temperature above which a building remains comfortable without heating because the sun, appliances, and occupants provide enough warmth. The VDI 3807, according to which the German Meteorological Service calculates degree days, sets this threshold at a daily mean temperature of 15 °C.
For your home, this is just a guideline. A well-insulated new build often no longer needs heat even at lower outdoor temperatures, while an unrenovated old building with old windows will likely need it a little longer. The construction also plays a role: solid walls store the warmth of sunny days and release it at night, while an attic quickly heats up in the spring sun.
The average is what matters, not the noon peak. A day with a warm afternoon and frosty night averages out significantly lower than it feels. Therefore, check the forecast for the entire coming week before you start the heating break.
Transitional period: First reduce, then switch off
You do not have to decide on a fixed date. In the weeks before the heating break, a gradual transition helps:
- Reduce heat in rooms individually: Bedrooms, hallways, and rarely used rooms can do without heat first. Set the thermostats there one notch lower.
- The bathroom last: Someone getting out of the shower perceives the same room temperature as cooler than in the living room. The bathroom can therefore be the last room to go on break.
- Vent briefly and thoroughly: Cross-ventilation with the thermostat turned down brings in fresh air without the radiator heating up against the open window.
- Shorten heating times: Many settings allow you to set your own times for the morning and evening. This way, the system only runs when it is really cool.
We explain how the numbers on the thermostat head relate to the room temperature in the article How to operate the thermostat correctly. For rooms that are only used occasionally, it is worth taking a look at rarely used guest rooms: The same applies there in spring.
Checklist before switching off
Before the heating goes on break, it is worth taking a walk through the apartment. Anything you notice now can be easily fixed in the summer.
- Did a radiator only get warm at the top or only in places during the winter? Make a note of which one.
- Were there gurgling, whistling, or cracking noises? Write down when and where.
- Can all thermostat heads be turned easily, or is one stuck?
- Are the valves, fittings, and bleeders dry, without limescale marks or drip marks?
- Does the pressure gauge on the heating system show the pressure that your specialist company called normal?
- Do furniture, curtains, or panels cover a radiator so that it could not heat properly?
These notes will help you and the heating specialist company. An appointment during the heating-free period is usually easier to plan than at the beginning of the heating season, when many people need help at the same time.
Important: If water is dripping from the valve or the system pressure keeps dropping, it is best to leave it to the heating specialist company. They will handle draining, refilling, and working on the valves.
Summer mode and setting the thermostats correctly
You should generally not switch off the system completely. Most heating systems have a summer mode: the room heating rests, but hot water for the shower and kitchen is still available. How to switch over is explained in the operating instructions of your device. In apartment buildings with a central system, the property management usually takes care of this.
A small adjustment on the radiators themselves helps: turn the thermostat heads all the way up for the heating break. If a head has been set to the lowest setting for months, it keeps the valve pin pressed in permanently, and the pin can get stuck. Because no heating water flows to the radiators in summer mode, the open position does not consume any energy.
If a thermostat head is stiff, inaccurate, or damaged, it is best to replace it now. The thermostat head with M30 × 1.5 connection fits many common valves; check the thread of your old head beforehand. If the valve itself needs to be replaced because the pin is permanently stuck, that is a job for the heating specialist company. The thermostat valve set in corner form with a ½-inch connection includes the valve and return fitting.
Tip: You can find additional valves, stop valves, and holders for small jobs during the heating-free period in the radiator accessories.
If it gets cold again in May
A late cold snap is part of spring. If it gets significantly cooler for several days, switch the heating system back to winter mode and set the thermostats in the rooms where you need warmth. For a single fresh morning, closed windows and a sweater are often enough.
In the bathroom, there is a solution that works independently of the central heating: A bathroom radiator with a heating element in mixed mode will heat up electrically when the system is already on break. This is especially worth it if you need a new bathroom radiator anyway. An electrical specialist company will install the electrical connection for this.
Frequently asked questions
Does the heating get damaged if it does not run all summer?
The radiators and pipes will not be damaged if they remain cold for months. Many heating systems briefly move their pump occasionally during the break so that it does not get stuck. This only works as long as the device remains switched on, which is why summer mode is usually the better choice than the main switch.
Should I bleed the radiators before the summer break?
Bleeding works best when the system is running and warm, so rather at the beginning of the next heating season. In spring, just make a note of which radiator gurgled or remained cold at the top. This way, you will know where to start in the fall.
Can I already switch off the heating completely at night in spring?
During the transitional period, there is nothing wrong with lowering it significantly at night. However, the rooms should not cool down completely as long as the nights are frosty. Otherwise, moisture will condense on cold exterior walls, especially in the bathroom.
Why should the thermostat heads be left open in summer?
A closed head presses the valve pin down for months. The pin can then get stuck, and the radiator will remain cold in the fall. Left open, the head relieves the valve without consuming energy as long as the system is in summer mode.
Make thermostats fit for the heating break
A stiff or inaccurate thermostat head can be quickly replaced during the heating-free period. Check the thread on the valve beforehand, then the new regulator will fit right away.


