Size advice

Wider or taller? 60 × 160 and 50 × 180 compared

60 × 160 and 50 × 180 have almost the same surface area, but fit very different walls. The comparison shows performance, connections, and everyday use, and when which format is the better choice.

by Helia Bad Redaktion6 min read

Badheizkörper HALDEN in Weiß an einer warmen Putzwand im Morgenlicht, daneben eine Holzbank mit Handtuch

In short: Whether your bathroom radiator should be wider or taller depends primarily on the wall. 60 × 160 and 50 × 180 deliver almost the same heat with the same design. The wider format fits under sloped ceilings and accommodates large bath towels, while the taller one works on narrow wall sections next to a door or shower. When replacing an old radiator, the location of the existing connections is also important.

The heat-free summer months are ideal for planning a radiator replacement in peace. At the latest when looking at the size chart, the question arises: Should I choose the wider or the taller one? The 60 × 160 and 50 × 180 formats are so close that many people are unsure.

We compare both using the HALDEN, a ladder-style bathroom radiator available in both sizes.

Almost the same surface area, almost the same output

Mathematically, a radiator measuring 60 × 160 cm has a slightly larger viewing area than one measuring 50 × 180 cm. This makes little difference in terms of heat output. The HALDEN in white shows it:

Feature 60 × 160 50 × 180
Output at 75/65/20 °C 937 W 915 W
Output at 55/45/20 °C 466 W 431 W
Water capacity 8.33 l 8.40 l
Weight 20.27 kg 19.86 kg
Bottom side connection, outside 550 mm 450 mm
Center connection 50 mm 50 mm

So, output is not a reason to choose one format over the other. If you heat with a low flow temperature, the wider model gives you a few extra watts. But that alone rarely makes the difference.

When the wider radiator is a better fit

A width of 60 cm offers practical advantages when hanging towels. A folded bath towel lies flatter on wider rungs and dries more evenly. Typical situations for 60 × 160:

  • Sloped ceiling or low window sill: If there is little height left above the radiator, the width makes up for the surface area.
  • Large bath towels: If you like hanging up large towels, 60 cm provides more support.
  • Easy to reach: At a height of 160 cm, the top rung is lower and easier for children and shorter people to reach.
  • Existing connections with 550 mm spacing: With a bottom side connection, the width will fit perfectly.

More about the rooms for which a 60 cm width is a good fit can be found in the article Bathroom radiators 60 cm wide. You can find all models in this width under bathroom radiators with a width of 60 cm.

When the taller radiator is a better fit

A taller, narrower radiator plays to its strengths on short wall sections. 10 cm less width may sound like little, but it often determines whether a radiator fits between a door and a washbasin or not. Typical situations for 50 × 180:

  • Narrow wall section: next to a door, between a shower and a window, or next to a tall cabinet.
  • Several towels stacked on top of each other: The extra height provides space for several narrow towels.
  • High rooms in old buildings: A tall radiator emphasizes the room's height and looks harmonious there.
  • Existing connections with 450 mm spacing: With a bottom side connection, the narrower width will fit.

Always add the distance to the floor to the radiator height. At a radiator height of 180 cm, the top edge quickly approaches 2 meters. How a tall radiator can be used in everyday life is described in the article Bathroom radiators 160 cm high.

Connections are decisive when replacing

In new construction, you can freely choose the format, and the pipes will be laid accordingly. When replacing an old radiator, it is different. The existing connections set the framework.

With a center connection, the flow and return pipes are located close together below the center of the radiator, with 50 mm between the centers for the HALDEN. Both formats fit here, as long as the center is correct. With a bottom side connection, the distance between the two outermost connections determines the width: 450 mm for the HALDEN with a width of 50 cm and 550 mm for a width of 60 cm. Therefore, measure the distance from center to center of your pipes before ordering.

Tip: Not every model is available in both formats. For example, the VARDE in white panel bathroom radiator is available in 60 × 160 with 1189 W at 75/65/20 °C, but not in 50 × 180. If you want a specific model, check first which sizes are available.

Four steps to a decision

  1. Measure the available wall space: The width between the door, shower, washbasin, and window, as well as the usable height up to the window, mirror, or sloped ceiling.
  2. Check the connections: Center or side connection, and for the side connection, the center-to-center distance.
  3. Estimate the heat demand: Is the output sufficient at your flow temperature and 24 °C in the bathroom?
  4. Consider everyday use: Who hangs up which towels, and can everyone reach the top rungs?

If both formats fit in the end, it comes down to taste. A wider radiator looks calmer and more homely, while a tall one looks more slender and architectural.

Frequently asked questions

Does a taller bathroom radiator heat the bathroom more evenly?

Hardly. The warm air rises in both formats and distributes itself under the ceiling. The radiator's location and the size of the room matter more for heat distribution than its width or height.

Can I install a 50 cm wide radiator on 550 mm connections?

With a bottom side connection, this will not fit directly, because the radiator's connections will then be 450 mm apart. The pipes would have to be offset, and the heating specialist will take care of that. If the pipes are located centrally under the radiator, i.e., as a center connection, the width does not matter for the connection.

Which format looks calmer in a small bathroom?

Usually the narrower one, because it takes up less wall width and leaves space next to other elements. In very low rooms, a tall radiator can look cramped by contrast. A taped outline on the wall quickly shows what looks better.

Isn't 60 × 180 simply the safe choice?

If the wall, connections, and accessibility fit, the largest format provides the most output and surface area. But in a small bathroom, it can look bulky, and the top rungs are high. Larger is only better if the format also suits the room.

Wide or tall: find the right format

Look at all bathroom radiators with a width of 60 cm and compare them with the narrower sizes. This way you will find the format that suits your wall and your connections.

View 60 cm wide Calculate heat demand

More on this topic:Size advice

Radiator Finder

Find the right radiator in three questions

Question 1 of 3

How should the radiator be heated?
Replace an old radiatoropen the replacement finder (centre distance)

View calculation or consider flow temperature? Calculate the heating load for your room

More from the shop

Browse all models, sizes and colours.

View Bathroom radiator 60 cm wide