Bidet or Shower Toilet: Two Ways to Personal Hygiene
Bidets and shower toilets perform the same function in completely different ways. This comparison shows what each solution requires in terms of space, connections, and maintenance, and who it is suitable for.

In short: Bidet or shower toilet: both clean with water instead of just paper. A bidet is a separate basin next to the toilet and requires additional space as well as its own water and drain connection, but no electricity. A shower toilet incorporates the cleaning into the toilet itself, saves space, but requires an electrical connection and slightly more maintenance of the technology.
In summer, when bathrooms are being renovated, the question often arises when planning the concealed cistern: should a bidet be placed next to the toilet, or is a toilet with a shower function sufficient? Both options have their fans. Which one is right for you depends less on taste than on the floor plan, connections, and everyday use.
Bidet or shower toilet: the difference
A bidet is a low basin made of sanitary ceramic, which you sit on after using the toilet. Water comes from a faucet, and you clean yourself by hand. It is a proven, simple solution without electronics, which is part of the basic equipment in many bathrooms in Southern Europe.
A shower toilet is a toilet with a built-in cleaning function. After using the toilet, a small shower arm extends and cleans with a warm jet of water. Many devices also have functions such as a heated seat or warm air for drying. There are complete shower toilets and attachments that can be mounted on an existing toilet.
In the Helia Bad product range, you will find the classic bidet and a rimless wall-hung toilet. We do not carry shower toilets. However, this comparison will still help you find the right solution for you.
| Criterion | Bidet | Shower toilet |
|---|---|---|
| Space | own area next to the toilet | no additional space |
| Water and drain | own connection | via the toilet |
| Electricity | not required | socket or permanent connection required |
| Operation | by hand | via button or remote control |
| Maintenance | ceramic and faucet | ceramic, shower arm, descaling |
Space in the bathroom
A bidet requires its own footprint and space in front of it so that you can sit down comfortably. In many bathrooms, it is placed directly next to the toilet, so that both can share a wall. In narrow bathrooms or guest toilets, there is often not enough space for this.
A shower toilet only takes up the space of a normal toilet. This makes it attractive in small bathrooms. Anyone who already only has one wall for the sanitary fixtures will gain space for a wider vanity unit or a bathroom radiator with a shower toilet.
The key is planning before tiling. The plumbing company knows the standard distances between the toilet, bidet, and wall. Ask them to draw up the layout for your bathroom before the connections are fixed.
Connections: water, drain, and electricity
A bidet requires a water connection, usually cold and hot, and its own drain. The CREAVIT AC 70S bidet is a floor-standing bidet made of sanitary ceramic and comes with a chrome-plated cross concealed valve. Because the valve is concealed, the wall remains clean. However, the necessary pre-installation must be present or installed during the renovation.
A shower toilet uses the toilet's water connection but also requires electricity for the pump, heater, and control system. This is usually a socket or a permanent connection behind or next to the toilet. If one is missing, a cable must be installed. With a wall-hung toilet such as the LAVINNO Tornado Rimless, the technology is located in the concealed cistern, which is not included in the delivery. Anyone who wants to switch to a shower toilet later should have an electrical cable installed in the concealed cistern during construction.
Important: Water and drain connections are installed by the plumbing company. An electrical company is responsible for sockets and permanent connections in the bathroom, because special protection zones apply there.
Everyday use, maintenance, and comfort
In everyday use, the bidet is the simpler solution. There is no technology that can fail, and the operation is immediately clear. However, you have to move from the toilet to the bidet, and cleaning is done by hand.
A shower toilet is more convenient because you remain seated. This can be a major advantage for people with limited mobility. In return, the technology needs to be maintained. The shower arm is cleaned regularly, and in areas with hard water, the device must be descaled. How often is stated in the instructions of the respective manufacturer.
The same rules apply to both for the ceramic. A tight, smooth glaze holds dirt and limescale less easily and can be cleaned with mild products. The article Glazed Sanitary Ceramic explains why this is the case.
Who it is suitable for
- Bidet: if there is enough space, you want a simple, non-electric solution, and you also want to use the basin for a foot bath or caring for small children.
- Shower toilet: if the bathroom is small, comfort is a priority, or movement is difficult.
- Keep both options open: If you are unsure, plan the water, drain, and electricity during the renovation so that both would be possible later.
You can read more about the space requirements and benefits of the bidet in the article Bidet in the Bathroom. You can find toilets in the Toilets collection.
Frequently Asked Questions
Can I retrofit a shower toilet without replacing the toilet?
Yes, with an attachment that is mounted instead of the toilet seat. It requires a water connection, usually via an angle valve, and an electrical connection nearby. Whether your toilet is suitable for this is stated in the attachment documentation.
Is a shower toilet more hygienic than a bidet?
Both clean with water and are therefore more thorough than paper alone. How hygienic they are in everyday use depends primarily on regular cleaning, and for the shower toilet, additionally on the condition of the shower arm.
Does a floor-standing bidet look harmonious next to a wall-hung toilet?
Yes, the combination is common. The wall-hung toilet is mounted on the concealed cistern, and the floor-standing bidet stands on the floor next to it. Make sure that the seat heights and shapes roughly match and that the connections for both are fixed before tiling, then the wall will look harmonious and tidy.
What else can a bidet be used for?
Many people also use it for a foot bath, for soaking small laundry items, or for caring for small children. A shower toilet does not offer this versatility.
The classic bidet for the bathroom
The CREAVIT AC 70S is a floor-standing bidet made of glazed sanitary ceramic, with a chrome-plated cross concealed valve included in the delivery.


